Personal Protective Equipment
Question | Answer | Notes |
What PPE is required when working around water, even if you are inside mobile equipment? | Personal floatation device (PFD) | |
What standard must be met for approved safety glasses? A. ANSI Z87.1; B. ANSI Z96; C. NIOSH 213; D. ANSI Z89.1 | A. ANSI Z87.1 | |
What standard must be met for approved hard hats? A. NIOSH 101; B. ANSI Z35.1; C. ANSI Z89.1; D. ANSI Z87.1 | C. ANSI Z89.1 | |
True or false: Air purifying respirators will help you in an oxygen-deficient atmosphere. | False | |
True or false: When selecting hearing protection, it is always best to choose the protectors with the highest noise reduction rating (NRR). | False | |
True or false: Respirator fit tests must be both qualitative and quantitative. | False | Respirator fit tests may be either qualitative or quantitative. |
Rule of thumb: Hard hats should be replaced every _______. A. 2 years; B. 5 years; C. 10 years; D. Never | B. 5 years | |
Which respirator provides the greatest protection? A. Air purifying half face; B. Supplied air full face; C. Self-contained breathing apparatus full face; D. Supplied air half face | C. Self-contained breathing apparatus full face | |
At which noise level do you need dual hearing protection? A. 90 dB; B. 95 dB; C. 100 dB; D. 105 dB | D. 105 dB | |
You are in an environment where the noise level is 100 dBA. Which ear plugs would protect you to the MSHA PEL? A. PVC foam (NRR 33); B. Composite foam (NRR 23); C. Polyurethane foam (NRR 25); D. Polyurethane foam (NRR 22) | A. PVC foam (NRR 33) | Subtract 7 dB from the NRR if noise is measured on the A-weighted scale. Divide by 2. Subtract from noise level. 4. Compare to MSHA PEL of 90 dBA TWA8 |
A self-contained self rescuer (SCSR) should be donned at the first sign of this condition. | Fire or smoke | |
What is the duration a W65 self-rescuer should last with 1% CO atmosphere? | 60 minutes | |
A W65 uses a chemical called hopcalite to change CO into CO2 but will not protect you in this type of atmosphere. | Oxygen-deficient | |
When using either an oxygen-generating unit or W65, it is important to respond in this way, to ensure it lasts longer. | Don’t panic and go slow and steady | |
What is the typical minimum PPE required on a mine site? A. Hard hat, ear protection, safety glasses; B. Ear protection, safety glasses, safety footwear; C. Hard hat, safety glasses, safety footwear; D. Safety glasses, safety footwear, respirator | C. Hard hat, safety glasses, safety footwear | |
What protective clothing is required while welding? A. Hard hat; B. Fire resistant clothing; C. Reflective clothing; D. Tinted glasses | B. Fire resistant clothing | |
You are in an environment where the noise level is 105 dBA. Which pair of ear plugs would protect you to the MSHA PEL? A. PVC foam (NRR 45); B. Composite foam (NRR 41); C. Polyurethane foam (NRR 37); D. Polyurethane foam (NRR 22) | C. Polyurethane foam (NRR 37) | How to use Noise Reduction Rating (NRR): Subtract 7 dB from the NRR if noise is measured on the A-weighted scale. Divide by 2. Subtract from noise level. Compare to MSHA PEL of 90 dBA TWA8 |
hat requirements apply when using a face shield for chemical handling? A. You must also wear a chemical apron; B. There are no additional requirements; C. You must wear an additional form of eye protection | C. You must wear an additional form of eye protection | |
You are working at a height of 12 feet on an unguarded platform. Which system would you use? A. Fall arrest; B. Fall restraint | B. Fall restraint | |
According to MSHA regulations, when must fall protection be used? A. When you are working at an elevation of 4′ or more; B. When you are working at an elevation of 6′ or more; C. When there is a danger of falling; D. When you cannot maintain three points of contact | C. When there is a danger of falling | |
True or false: Prescription safety glasses must have side shields to be able to be used on the job. | True | |
Which two of the following are known limitations of a W65 self-rescuer? A. It gets hot when used in a CO-rich environment; B. It will help you in an oxygen-deficient environment; C. The concentration of CO does not impact how long it lasts; D. There is no direct indicator of how long it will last | A. It gets hot when used in a CO-rich atmosphere; D. There is no direct indicator of how long it will last | |
Name three signs that you should don your self-rescuer. | Fire; smoke; stench gas warning; alarms (as defined by the mine’s emergency action plan); communication commands; direct command from mine safety or mine management; other people wearing theirs | |
What three responsibilities do you have regarding your mine-issued self-rescuer? | To check it daily for damage and ensure it appears to be in working order; To exchange it for another one if it appears damaged; To know how to use it | |
What are the basic requirements for acceptable safety glasses? A. They must be impact rated; B. Lenses must be clear; C. They must have side shields; D. Frames may not be decorative; E. A and C | E. A and C | |
Which hard hat conducts electricity and should not be used around electrical hazards? A. Class A; B. Class B; C. Class C; D. Class D | C. Class C | |
What type of gloves will protect you from an oil injection injury? A. Rubber; B. Leather; C. Kevlar; D. None | D. None | |
What is the minimum weight per person that an engineered fall protection anchor must hold? A. 500 lbs; B. 1000 lbs; C. 2500 lbs; D. 5000 lbs | D. 5000 lbs | |
True or false: At the mine site, you will be required to purchase your own hearing protection in the model that fits your ears best. | False | |
Regarding hearing protection, what does NRR stand for? | Noise reduction rating | |
True or false: You are never allowed to wear both ear plugs and ear muffs at the same time. | False | When noise levels reach 105 dBA, dual hearing protection is required. |
True or false: Negative air-purifying respirators do not need to be fit tested. | False | |
What requirement must first be met in order to wear a respirator? A. You have to have been medically cleared; B. You have to be fit tested; C. You have to pick which type of respirator fits you best; D. You have to have training | A. You have to have been medically cleared | |
True or false: Qualitative fit testing includes taking measurements inside and outside the mask. | False | |
When wearing fall protection, what is the first thing you should do? A. Check that the anchor is rated correctly; B. Inspect the harness; C. Make sure the harness fits correctly; D. Test the harness | B. Inspect the harness |